• Traffic technology & traffic signs
  • Traffic signs construction
  • 
  • Reflective Films
  • 
  • Assignment of traffic sign sizes to speed ranges
  • 
  • Digital print traffic technique
  • 
  • Large signs
  • 
  • Street name signs
  • 
  • Warning- and stop devices
  • 
  • Traffic mirrors
  • 
  • Devices for fastening — lateral
  • 
  • Devices for fastening — head over
  • 
  • 3M™ Driver Feedback Sign DFS 700
  • 
  • The venison warning reflector
  • 
  • Internally-illuminated traffic signs
    for crosswalks
  • 
• Railway signs
• 
• Special signs
• 
• Enamel products
• 
• Recruitment & advertisement
• 
• Town demand & municipal demand
• 
• Digital Print (Advertisement)
• 
• Laser cutting
• 

Lateral signposting - latticed masts

Latticed masts are put up mainly beside the roadway with ground clearances of 1.500 mm to 2.000 mm. With a distance of at least 1.800 mm between the fork masts these are valid as slightly malleable and are to be considered therefore as passively sure. They should explain for the motorist, in case of an impact, no danger and can be put up without passive protective elements (protective planks).

Lateral signposting - pipe masts

Pipe masts are used mainly for the road instruction in the internal-local area and as a presignpost before the traffic circle. In general only limited speed at the assembly place may be allowed, because the big and stable round pipes are valid in case of a collision by a vehicle as difficult therefore passively not certainly. With higher speed areas a passive collision protection, e.g., with protective planks, is necessary therefore and is necessary. This device can be also used especially well in the area of sidewalks and cycle tracks. The connection to the mast occurs with hot-dip galvanised push rings with which the sign is fastened to the back-sided stiffening by means of adjustably console and clamp blocks.